2025 Ditch Witch® Directional Drills JT21

Information

2025 Ditch Witch® Directional Drills JT21

The Fastest Way To Drill.

With a 35% faster carriage speed than any drill in its class and 40% more downhole horsepower*, the JT21 will get you on and off the jobsite faster than ever before.

Features may include:

35% Faster Carriage Speed
  • 35% faster than any drill in its class, the JT21’s 215 fpm carriage speed sets a new standard for efficiency, so you’ll experience reduced cycle times and increased jobsite productivity.
40% More Downhole Horsepower
  • With its direct-drive motor, the JT21 allows up to 40% more downhole horsepower* delivering more power to the bit. That means faster drilling and less downtime, so you can power through tough ground and keep the job moving without missing a beat. *Compared to the previous model.
20,000+ lbs Of Thrust/Pullback
  • 21,000 lbs of pullback and 20,000 lbs of thrust make the JT21 built to handle the tough stuff. No matter what type of ground, it’s got the muscle to keep you moving and stay on schedule—no matter the challenge.
LESS DOWNTIME
  • Operating at up to 35 gpm, the JT21’s large displacement mud pump runs at a lower rpm, increasing its life and handling the toughest jobs with ease.
SUPERIOR CUSTOMER SUPPORT
  • Backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

Photos

Highlights

  • Howell, Michigan
  • 2025
  • Ditch Witch®
  • Directional Drills JT21
  • TD2.9
  • Diesel
  • Available
  • 55.5 in (1.41 m)
  • 95.5 in (2.43 m)

Specifications

  • 2025
  • Ditch Witch®
  • Directional Drills
  • JT21
  • Directional
  • TD2.9
  • Deutz®
  • Manufacturer's gross power rating: 74 hp (55 kW)
  • 2,600 rpm
  • Spindle: 2,250 ft·lb (3050 N·m)
  • Medium: Liquid
  • Turbocharged
  • 3.62 in (92 mm) | Diameter: 4 in (102 mm)
  • 4.33 in (110 mm)
  • 4
  • 177 in3 (2.9 L)
  • compliance, highly regulated: EPA Tier 4 EU Stage V | compliance, less regulated: EPA Tier 4i EU Stage IIIA
  • Diesel
  • Direct
  • SAE cold crank rating @ 0°F (-18°C): 950 amps
  • SAE reserve capacity rating: 195 min
  • Spindle, max: 270 rpm | Carriage thrust travel speed: 215 fpm (65.5 m/min) | Carriage pullback travel: 215 fpm (65.5 m/min) | Ground travel speed Forward: 2.9 mph (4.7 km/h) / Reverse: 2.9 mph (4.7 km/h)
  • Thrust force: 20,000 lb (89 kN) | Pullback force: 21,000 lb (93.4 kN)
  • Operator sound pressure per ISO 6394: < or = 82 dBA
  • 1,000 psi (69 bar)
  • Max: 35 gpm (132 l/min)
  • Entry angle, max: 11-15° | Angle of approach: 17° | Angle of departure: 17° | Diameter of drill pipe, tool joint end: 2.63 in (66.8 mm) | Diameter of drill pipe: 2.06 in (52.3 mm) | Bend radius, min: 107 ft (32 m)
  • 217.9 in (5.53 m) | of drill pipe: 120 in (3.05 m)
  • 55.5 in (1.41 m)
  • 95.5 in (2.43 m)
  • Reservoir: 16.4 gal (62.1 L)
  • 28.2 gal (106.7 L)
  • Engine lubrication oil, w/filter: 9.5 qt (9 L)
  • 5 gal (18.9 L)
  • Operating: 12,420 lb (5634 kg)
  • of drill pipe, lined: 67 lb (30.4 kg)
  • Backreamer diameter: Soil dependent